ServicesSolar Panel Repair
Solar Panel Repair in Kearns
When your system's output slips or the inverter shows a fault, we track down the real cause. Our small crew tests each part outside your home, shows you photos of what failed and puts the fix in writing before any work begins.
Getting your system back to full output
A solar system usually fails quietly. Production slips a little each month, an inverter light changes color, or the power bill creeps up before anyone notices. Most of the time the cause is one part: a loose connector, a failed inverter, a damaged panel or a wire that has worn through. Finding that part is the real job.
We keep it simple. The same small crew that tests your system is the crew that comes back to fix it, so you are not explaining the problem to a new person at every visit. You talk to people who already know your setup.
If the system is newer and your goal is more capacity rather than a fix, our Solar Panel Installation and Solar System Add-Ons pages cover that work.
What a repair visit covers
- 01
Full system testing
We check voltage and current on each string, look at the inverter readings and compare what the system makes against what it should make for its size. Numbers tell us where to look before we start taking anything apart.
- 02
Inverter diagnosis and replacement
Inverters are the part most likely to wear out. We read the error codes, confirm whether the unit has failed or something upstream is causing the fault, and replace it only when that is the right answer.
- 03
Wiring and connector repair
Connectors can loosen or corrode, and exposed wiring can be chewed by rodents or cracked by years of sun. We find the damaged run, replace it and secure it so it stays put.
- 04
Damaged panel swaps
A panel with cracked glass or a burned spot can drag down the rest of its string. We replace the panel with a compatible match so your output comes back up.
- 05
Monitoring checks
If your app went blank or stopped reporting, we sort out whether the system or just the communication link is down, then get the data flowing again.
- 06
Photos and a plain explanation
You get photos of what we found and a written estimate that lists each part and task, so you can decide with the facts in front of you.
Questions about Solar Panel Repair?
Call(801) 457-8629Signs your system needs a repair
Production dropped and stayed down
Output dips on cloudy days, and that is expected. When the numbers stay low through a run of clear, sunny weather, something in the equipment has likely stopped working right.
Warning lights on your inverter
A red or amber light, or a fault message on the screen, means the inverter has detected a problem. Jot down whatever the display shows before you call; it saves time.
Your power bill went up
If your usage has not changed but your bill has, your panels may be sending less power than they used to.
Visible damage
Cracked glass after a hailstorm, loose or hanging wires, or scorch marks near a connector all need a look soon, before a small problem spreads.
A breaker that keeps tripping
A solar breaker that trips again and again is a safety warning. Leave it off and have the system checked.
Monitoring went silent
Sometimes it is only the Wi-Fi connection. Sometimes it is the inverter. Either way, you lose track of what your system is doing until it is sorted.
How a repair works, start to finish
- 1
A quick phone conversation
Describe what has changed with your system, and we will want to know roughly how old it is, which inverter brand you have and whether any codes are showing. If it helps, we can begin with a free virtual appointment and review your monitoring data together.
- 2
On-site testing
Our crew arrives at a scheduled time and tests the equipment outside your home. We power the system down safely before touching any wiring and keep clear of your garden and walkways.
- 3
Your written estimate
You see photos of the problem, hear what failed and why, and get a line-item estimate. If a part might still have manufacturer coverage, we point that out so you can check before you pay for it.
- 4
Repair and verification
The people who found the problem are the ones who fix it. Before leaving, we restart the system, confirm it is producing and reporting again, and clean up the work area.
What affects the cost of a repair
Repair costs depend far more on what failed than on the size of your system. A loose connector and a new inverter are very different jobs. We give you the full picture in writing before any work starts, so there are no surprise charges at the end.
- Which part failed
- Reseating a connector or replacing a short wire run is a smaller job than swapping an inverter or several panels.
- Parts availability and coverage
- Older systems sometimes use panels or inverters that are no longer made, so a compatible replacement has to be sourced. A part still under manufacturer coverage can lower what you pay.
- How many components are affected
- One damaged panel is straightforward. Hail or rodent damage spread across a string takes more parts and more time.
- Access to the equipment
- Panels and wiring that are easy to reach take less setup than equipment in tight or hard-to-reach spots.
- Permits for electrical changes
- Some repairs, like an inverter replacement, may call for a permit and inspection. We let you know up front if yours does and handle the paperwork.
Solar panel repair questions
Will you fix solar equipment that a different installer put in?
We do. Plenty of the systems we test were installed by someone else. Have the inverter brand and any paperwork handy, and we can tell you which parts we can source and what the repair would involve.
My system is several years old. Does a repair still make sense?
In many cases, yes. Inverters tend to wear out well before the panels do, so a single inverter swap can bring an aging setup back to strong production. If we find that fixing your system is not a good use of your money, we will say so plainly.
Do I need to be home during the repair?
Not always, since nearly all of the work is outside. We do want to walk you through the findings and the fix, so we will pick a time that suits you, either in person or over the phone.
Should I shut my system off if something looks wrong?
Yes, if you notice scorch marks, a burning smell or a breaker that keeps tripping. Use the shutdown steps printed on your inverter label and keep it off until we have checked it. A plain drop in output is fine to leave running.
How long does a typical repair take?
Once the part is on hand, many repairs wrap up in a single visit. When a panel or inverter needs to be ordered, the same crew books a return trip and keeps you posted while you wait.
Let's find out what's wrong with your system
Tell us what you are seeing and we will explain the next step. We serve Kearns and nearby towns like West Valley City, Taylorsville and West Jordan.